Member Golf OutingDate: August 3, 2018
Join us for a friendly competition on the green. RSVP today for our annual member-only golf outing.
Split nitrogen (N) fertilizer applications can play an important role in a nutrient management strategy that is productive, profitable, and environmentally responsible, according to NutrientStewardship.com. Dividing total nitrogen application into two or more treatments can help growers enhance nutrient efficiency, promote optimum yields and mitigate the loss of nutrients.
By more specifically synchronizing nitrogen supply with a plant’s ability to utilize nutrients, split application can be an important component of 4R Nutrient Stewardship — right source, right rate, right time and right place.
Depending on soil type, climate, agronomic practices and other factors, nitrogen fertilizer can be vulnerable to loss. Denitrification, leaching and volatilization impose costs that include lost productivity and negative environmental impact. Split-applying nitrogen fertilizer is one way to confront these challenges. When a crop’s total nitrogen requirement is supplied with a single pre-plant or at-planting application, most of the N must “wait” for the target crop’s future needs and that means the window for potential loss remains open longer.
By postponing a portion of the N treatment until the crop is better able to utilize the nutrient, plants take up the nitrogen more quickly and efficiently. That means growers get more from their fertilizer investment and fertilizer losses that can contribute to environmental concerns are lessened.
Enhanced Nitrogen Efficiency With Split Applications
Agriculture faces the daunting challenge of meeting food, forage and fiber needs in a manner that is both environmentally and economically sustainable while striving to increase productivity with more efficient use of resources. Fertilizer is an integral part of this quest and the adoption of research-based best management practices (BMPs), such as split fertilizer application, reward farmers and consumers alike. To “split-apply” nitrogen, growers make two or more fertilizer applications during the growing season rather than providing all of the crop’s N requirements with a single treatment prior to, or at, planting.
“When all of the nitrogen is supplied ahead of crop growth, more of that nitrogen is susceptible to denitrification, leaching or volatilization,” explains Kansas State University Agronomist and Professor Emeritus Gary Kilgore. “Different growing environments pose different potential nitrogen loss conditions — nitrogen leaching beyond the root zone, for instance, is most likely in lighter textured soils not inhibited by a clay layer — but almost all growers face the possibility of losing some of the nitrogen they apply.
“When you split your N application and put a portion on later, almost all of that second application will be taken up by the plant. Plant roots are more developed and better able to access the N and the plant’s nitrogen requirement is increasing so uptake is much more efficient,” adds Kilgore who is also a Kansas Soybean Director, a Kansas Grain Sorghum Commissioner and executive secretary of the Kansas Forage and Grasslands Council.
Consider Split Application Crop-by-Crop
Split application offers efficacy benefits on a wide range of crops and forages but its management must be considered on a crop-by-crop basis. The timing of post-planting nitrogen applications is especially critical. The target species must be immature and growing to provide time for the nitrogen to be absorbed and metabolized in order to have the most efficient yield or quality impact. In the case of corn, for instance, all of the nitrogen should be delivered to the plant before ears are set. In wheat, the second application of N generally is best made 10 days to two weeks prior to the jointing stage when leaf tissue elongates to form a stem and the plant’s nitrogen requirement increases as it begins its reproductive phase.
All crops, however, have different nutrient requirements. Because of a need for continuous, in-season production, forages especially benefit from split-applying nitrogen. For bermudagass in particular, split application is vital. While nutrients like phosphorus are taken up as needed by the plant, nitrogen will be “spent” much more quickly and, therefore, won’t carryover. The result of a single application at the beginning of the growing season is substantial early-season production with dwindling productivity henceforth. For a forage crop like bermudagrass to sustain prolong high productivity at a high quality level, N applications must be made throughout the growing season to equalize yield and maintain protein and total digestible nutrients (TDN).
Source and Placement Important
As in all fertilization strategies, source, rate, time and place should be the foundation of split fertilization decisions. Although various forms of nitrogen — granular, liquid and anhydrous — can be utilized in a split application scenario, their placement is critical. Anhydrous, for example, can be used on row crops but should be injected into the soil and, therefore, protected from loss. Urea spread over the top for the second in-season application is vulnerable to surface volatilization.
Just like the crops they nourish, different N sources have different characteristics. Ammonium forms are less likely to emit greenhouse gases (GHG) and are less vulnerable to denitrification than are nitrate fertilizers. Preferably, urea-containing fertilizers should be applied when soil incorporation by rainfall or irrigation is likely within 24-48 hours, or incorporated by tillage. This is especially important in environments favorable to ammonia volatilization.
In addition to protecting crop productivity and fertilizer investment, farmers have a broader stake in limiting nitrogen losses. Excess nitrate in the soil under warm, wet or waterlogged conditions can result in emissions of nitrous oxide, a greenhouse gas whose global warming potential far exceeds that of carbon dioxide.
Better Yields, Less N Loss
Joe Smith of Independence, KS, has been a split application proponent for several years. A retired county Extension agent, Smith participates in his family’s farming operation at McCune, Kansas.
“For us, it makes for a more efficient use of nitrogen,” he says. “We get a lot of denitrification in our area and if we don’t use the nitrogen, we lose it. By putting nitrogen on when the plant can fully utilize it, we get better efficiency and we see better yields.
“When that corn plant is about 10-12 inches tall, it’s at a stage that it’s really ready to charge. It’s really ready to take advantage of the nitrogen and it’s going to use it up.”
The first split application is applied, in the form of anhydrous, as close to planting as possible in order to minimize N losses. A starter is used through the planter and the application at 10-12 inches provides the final boost for optimum yields.
Update your browser to view this website correctly. Update my browser now